[2018 Version] Testing PassLeader 210-065 Exam Questions and Answers To 100% Pass 210-065 Exam

greatexam   January 9, 2018   Comments Off on [2018 Version] Testing PassLeader 210-065 Exam Questions and Answers To 100% Pass 210-065 Exam

New Updated 210-065 Exam Questions from PassLeader 210-065 PDF dumps! Welcome to download the newest PassLeader 210-065 VCE dumps: https://www.passleader.com/210-065.html (363 Q&As)

Keywords: 210-065 exam dumps, 210-065 exam questions, 210-065 VCE dumps, 210-065 PDF dumps, 210-065 practice tests, 210-065 study guide, 210-065 braindumps, Implementing Cisco Video Network Devices (CIVND) Exam

P.S. New 210-065 CIVND dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpfjREa25iSExKUkxvQi12aVdDMWNJSGs0T2JwYkhVUmtwdXhETmZVR3ZNek0

>> New 210-060 CICD dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpfnVuLUxTSlNxTUNBQ1N3SUstc29mY3JEOW9tZ1VXaFJwclpyU0l6NkhNZEE (Jan/2018 Updated, NEW!!!)

NEW QUESTION 347
Which effect of the CLI set audio aec enable command on the immersive Cisco Telepresence system is true?

A.    Echo cancellation is enabled.
B.    Call economy quality feature is enabled.
C.    Noise cancellation is enabled.
D.    AEC audio codec is enabled.

Answer: A

NEW QUESTION 348
What is the process for resetting a Cisco VCS control appliance back to initial default configuration?

A.    Push down and hold the reset button on the back of the VCS appliance for 10 seconds and power cycle the device.
B.    Log onto the CLI console as root and initiate the defaults-reset command.
C.    Log into the GUI interface as administrator, choose System Settings, select Restore, select Factory Reset.
D.    Log onto the CLI console as root and initiate the factory-reset command.

Answer: D

NEW QUESTION 349
Which two Cisco TelePresence endpoints support hosting embedded multisite conferences? (Choose two.)

A.    SX20
B.    MX800
C.    DX70
D.    DX80
E.    Jabber Video for Cisco TelePresence

Answer: AB

NEW QUESTION 350
Which option is the Cisco recommended layout if cascading is being used?

A.    Enhanced Continuous Presence
B.    Full Participant
C.    Continuous Presence
D.    Active Speaker

Answer: C

NEW QUESTION 351
A Cisco EX60 is connected to the network, but users cannot make calls and the device is unregistered. The voice engineer configured the device on Cisco Unified Communications Manager. Which two options are causes of this problem? (Choose two.)

A.    SIP URI is not configured correctly.
B.    H.323 parameters are not configured correctly.
C.    IP address is in a different subnet.
D.    No user is associated to a device.
E.    SIP proxy is not configured correctly.

Answer: DE

NEW QUESTION 352
Which desktop endpoint support 802.3af PoE?

A.    DX70
B.    DX80
C.    DX90
D.    DX650

Answer: D

NEW QUESTION 353
An engineer is backing up a VCS configuration. Which two methods can be used? (Choose two.)

A.    FTP
B.    SFTP
C.    SSH
D.    Web administration
E.    Local

Answer: BC

NEW QUESTION 354
An engineer sees a video camera icon on the Cisco IP phone screen status line. Which meaning of this icon is true?

A.    The Cisco VT camera is connected to the PC, and the PC is connected to the Cisco IP phone.
B.    The Cisco IP phone has web access.
C.    The Cisco IP phone is receiving a video call.
D.    The Cisco IP phone is configured with video capabilities.

Answer: D

NEW QUESTION 355
When an administrator schedules a conference, which three devices are part of the process? (Choose three.)

A.    Endpoint
B.    Cisco Prime Collaboration Manager
C.    Cisco TelePresence Management Suite
D.    Cisco Communications Manager
E.    MCU appliance
F.    Cisco TelePresence Content Server

Answer: BDF

NEW QUESTION 356
Which option is an immersive endpoint?

A.    Cisco TelePresence EX90
B.    Cisco TelePresence TX9000
C.    Cisco TelePresence SX10
D.    Cisco TelePresence DX70

Answer: C

NEW QUESTION 357
An engineer is using a cascading feature with Cisco TelePresence Conductor and Cisco TelePresence Servers. Which two limitations will the engineer likely encounter? (Choose two.)

A.    Ad-hoc conferencing cascading is not supported.
B.    Only single-screen endpoints are supported through cascading links.
C.    Multiple-screen endpoints are supported only with three or more Cisco TelePresence Servers.
D.    Scheduled conferencing is not supported.
E.    Ad-hoc conferencing cascading is supported only with three or more Cisco TelePresence Servers.

Answer: AD

NEW QUESTION 358
Which two features are available on a Cisco TelePresence Server that are not available on a Cisco TelePresence MCU? (Choose two.)

A.    auto-attendant conference menu
B.    automatic lecture mode
C.    virtualization
D.    multiscreen endpoint support
E.    multiple layouts

Answer: CE

NEW QUESTION 359
While trying to register to Cisco UCM, a Cisco IP phone reports TFTP authorization failure. Which cause of this issue is true?

A.    The phone has a cabling issue.
B.    A firewall in the network is blocking access.
C.    The TFTP address for the phone is not in the CTL file.
D.    DHCP option 150 has the incorrect TFTP IP address configured.

Answer: D

NEW QUESTION 360
……


Download the newest PassLeader 210-065 dumps from passleader.com now! 100% Pass Guarantee!

210-065 PDF dumps & 210-065 VCE dumps: https://www.passleader.com/210-065.html (363 Q&As) (New Questions Are 100% Available and Wrong Answers Have Been Corrected! Free VCE simulator!)

P.S. New 210-065 CIVND dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpfjREa25iSExKUkxvQi12aVdDMWNJSGs0T2JwYkhVUmtwdXhETmZVR3ZNek0

>> New 210-060 CICD dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpfnVuLUxTSlNxTUNBQ1N3SUstc29mY3JEOW9tZ1VXaFJwclpyU0l6NkhNZEE (Jan/2018 Updated, NEW!!!)