This page was exported from PassLeader VCE Dumps and PDF Dumps for Free
[
https://www.testkingvce.com
]
Export date: Thu Mar 28 23:25:24 2024 / +0000 GMT
New Updated 300-180 Exam Questions from PassLeader 300-180 PDF dumps! Welcome to download the newest PassLeader 300-180 VCE dumps: https://www.passleader.com/300-180.html (416 Q&As) Keywords: 300-180 exam dumps, 300-180 exam questions, 300-180 VCE dumps, 300-180 PDF dumps, 300-180 practice tests, 300-180 study guide, 300-180 braindumps, Troubleshooting Cisco Data Center Infrastructure (DCIT) Exam P.S. New 300-180 DCIT dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpNWtfazZEX1o5eWc >> New 300-160 DCID dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpeVktaU1qdFl4WGs >> New 300-170 DCVAI dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpNVNCbDRrNUN3NWM >> New 300-165 DCII dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpMVRmUUJZRWU3cU0 >> New 300-175 DCIT dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpcTYwUlg5R2o2Tlk NEW QUESTION 400 A. Remove the local disks that are connected to the blade. Answer: C NEW QUESTION 401 A. The time is incorrectly synchronized. Answer: A NEW QUESTION 402 A. Change the ready-only access permission for the tenants to read-write. Answer: C NEW QUESTION 403 A. Global service profiles consume IDs from the blocks that have an assigned ID range qualifier. Answer: B NEW QUESTION 404 A. There are too few links. Answer: B NEW QUESTION 405 A. Configure BGP for IPv6. Answer: D NEW QUESTION 406 A. the fabric zone to which the rule applies Answer: C NEW QUESTION 407 A. Restart the TFTP service. Answer: B NEW QUESTION 408 A. Change the device alias mode to enhanced. Answer: D NEW QUESTION 409 A. on the next reboot Answer: CE NEW QUESTION 410 A. The packet must transverse a Layer 3 interface. Answer: C NEW QUESTION 411 A. The node was disabled by the user. Answer: A NEW QUESTION 412 Answer: NEW QUESTION 413 Download the newest PassLeader 300-180 dumps from passleader.com now! 100% Pass Guarantee! 300-180 PDF dumps & 300-180 VCE dumps: https://www.passleader.com/300-180.html (416 Q&As) (New Questions Are 100% Available and Wrong Answers Have Been Corrected! Free VCE simulator!) P.S. New 300-180 DCIT dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpNWtfazZEX1o5eWc >> New 300-160 DCID dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpeVktaU1qdFl4WGs >> New 300-170 DCVAI dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpNVNCbDRrNUN3NWM >> New 300-165 DCII dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpMVRmUUJZRWU3cU0 >> New 300-175 DCIT dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpcTYwUlg5R2o2Tlk
You configure a boot from SAN multipath environment that uses an EMC storage array. The host is registered on the array. Other hosts that have the same WWPN also appear to logged in. Which action resolves the issue?
B. Ensure that the storage array is cable correctly.
C. Explicitly register all the paths on the storage array.
D. Configure that LUN masking is applied correctly.
In Cisco UCS Central you have a certificate that has the status set to Not Yet Valid. Which scenario could cause the issue?
B. The trusted point uses a bundled certificate that has a minimum depth of 10.
C. The certificate field is empty.
D. The certificate is issued by a different trusted point.
You have a Cisco APIC environment. An administrator configures the administrator roles for managing a service configuration. You discover that some tenants can import device clusters but cannot use the device clusters. What should you do to ensure that the tenants can use the device clusters?
B. Grant the tenants the nw-svc-device privilege.
C. Grant the tenant the nw-svc-devshared privilege.
D. Grant the tenant the nw-svc-policy privilege.
Refer to the following words:
ID is duplicated assigned
You see the fault when configuring a global ID pool on Cisco UCS Central. Which scenario could cause the issue?
B. The same ID is assigned to the service profiles in two registered domains.
C. The same ID is defined in Cisco UCS Central and Cisco UCS Manager.
D. The same IP address is configured in two registered domains.
You have an FEX connected with two uplinks. When you attempt to set the max-link parameter to 4 for the FEX, you receive an error message. Which issue could cause the error?
B. The links are configures as port channels.
C. The FEX is offline.
D. The links must be domain prior to changing the parameters.
The external routes are unreachable from the fabric in a Cisco ACI environment. What should you do?
B. Configure BGP confederation.
C. Apply the BGP policy map to the interface.
D. Enable MP-BGP in the fabric.
Refer to the exhibit:
What does the output in the Scope column indicate?
B. the VRF tenant to which the rule applies
C. the VRF segment to which the rule applies
D. the EPG to which the rule apples
Refer to the exhibit:
A Cisco UCS Director appliance that has the Cisco UCS Director Bare Metal Agent installed fails to boot from the PXE TFTP and the Bare Metal Agents are running. Which action do you take to resolve the issue?
B. Restart the Cisco UCS Director Bare Metal Agent services.
C. Reinstall the Cisco UCS Director Bare Metal Agent.
D. Reinstall TFTP.
Refer to the exhibit:
What should you do to release the lock on the device alias database?
B. Ensure that the zone alias is configured.
C. Disable the fabric distribution.
D. Commit the pending changes.
Which two maintenance policy options can you use to specify when the Cisco UCS Manager deploys a service profile change? (Choose two.)
B. when acknowledged by any user
C. immediately
D. when acknowledged by a user with root privileges
E. when acknowledged by a user with administrator privileges
VM-1 and VM-3 are in different EPGs but in the same BD. Which statement about the communication between VM-1 and VM-3 is true?
B. The flow uses unencapsulated VLANs.
C. The flow must transverse the spine.
D. The flow stays local to the leaf switch.
You have a node in a decommissioned state. What could cause the issue?
B. The node is unreachable.
C. The node is in a transient state.
D. The node cannot join the fabric
Drag and Drop
Refer to the exhibit:
Boot from SAN fails. The host fails to detect the LUNs. You must resolve the issue. Drag and drop the VVWPNs on the left to the correct zones on the right.
......
Post date: 2018-12-11 06:20:28
Post date GMT: 2018-12-11 06:20:28
Post modified date: 2018-12-11 06:20:28
Post modified date GMT: 2018-12-11 06:20:28
Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team www.gVectors.com